PERANCANGAN DAN IMPLEMENTASI SMART GARDEN BERBASIS INTERNET OF THINGS (IOT) PADA PERUMAHAN CENTRAL PARK CIKARANG

Authors

  • Ikhsan Romli Universitas Pelita Bangsa
  • Kristoforus Lensiprimo Nong Hugo Universitas Pelita Bangsa
  • Irfan Afriantoro Universitas Pelita Bangsa

DOI:

https://doi.org/10.21927/ijubi.v4i2.1974

Keywords:

NodeMCU 8266, Soil Moisture, DHT 11, Relay, Internet of Things, Smart Garden, Blynk

Abstract

Technological developments, especially in agriculture and plantations in era 4.0, have greatly increased over time. One of them is in terms of plant care. Plant care is one of the activities carried out to keep plants fertile and healthy. Moreover, in the dry season plant care is very important to do such as, doing watering periodically in accordance with the right time, and also light lighting must be in accordance with the needs of the plant. In this writing, researchers designed a tool that can respond to and work on commands that have been sent, and also reply to messages about the information displayed on the blynk application. Smart Garden Tools It uses NodeMCU 8266 as a controller as well as a soil moisture sensor as a soil moisture detector, and DHT11 as a temperature and humidity sensor. The results of this study are to minimize the occurrence of damage to plants, make it easier for residents to control and monitor the condition of the house in real time, and also to improve the quality of plants in order to grow properly.

References

K. Affandi, "Rancang Bangun Smart Garden Berbasis Internet of Things dengan Bot Telegram," 2019.

R. K. Ghito and N. Nurdian, " Rancang Bangun Smart Garden System Menggunakan Sensor Soil Moisture Dan Arduino Berbasis Android (Studi Kasus : Di Gerai Bibit Narnea Cikijing)," 2018.

A. Karjagi and T. Bagewadi, "IoT Enabled Smart Garden Kit Along With Weather Station," 2020.

M. Faizal, "Penerapan Smart Home Untuk Pengontrolan Lampu Berbasis Internet Of Things (IoT) (Studi Kasus : Perumahan Taman Cikarang Indah 2)," 2020.

A. Sinta, "Apa Yang Dimaksud Dengan Internet of Things," September 2016. [Online]. Available: https://www.dictio.id/t/apakahyang-dimaksud-internet-of-thingsiot/984.

A. A. Sougy, "Rancang Bangun Smart Garden Berbasis Iot Menggunakan Aplikasi BLYNK," Politeknik Negeri Balikpapan Jurusan Teknik Elektronika, 2018.

N. H. L. Dewi, M. F. Rohmah and S. Zahara, "ROTOTYPE SMART HOME DENGAN MODUL NODEMCU ESP8266 BERBASIS INTERNET OF THINGS (IOT)," Mahasiswa Teknik Informatika Universitas Islam Majapahit, 2018.

a. faudin, "Apa itu Module NodeMCU ESP8266?," JULI 2017. [Online]. Available: https://www.nyebarilmu.com/apa-itu-module-nodemcu-esp8266/.

R. H. M, A. Novianti and S. Kristiyana, "PERANCANGAN APLIKASI BLYNK UNTUK MONITORINGDAN KENDALI PENYIRAMAAN TANAMAN.," Teknologi Elektro, Fakultas Teknologi Industri Institut Sains dan Teknologi AKPRIND Yogyakarta, 2019.

J. Arifin, L. N. Zulita and H. , "PERANCANGAN MUROTTAL OTOMATIS MENGGUNAKAN MIKROKONTROLLER ARDUINO MEGA 2560," Jurnal Media Infotama Vol. 12 No. 1, 2016.

Downloads

Published

2021-12-31

Issue

Vol. 4 No. 2 (2021): Indonesian Journal of Business Intelligence (IJUBI)

Section

Articles

License

COPYRIGHT TRANSFER FORM

The copyright to this article is transferred to Alma Ata University Press if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to AAU Press. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.

We declare that:

1. This paper has not been published in the same form elsewhere.

2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.

3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.

Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to AAU Press. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.

The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.

Retained Rights/Terms and Conditions

 

1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.

2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the AAU Press copyright notice are indicated, the copies are not used in any way that implies AAU Press endorsement of a product or service of any employer, and the copies themselves are not offered for sale.

3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.